*Place the candle in an area free from drafts. The first time you light the candle, allow it to burn until the liquid wax covers the entire top of the candle. This breaking in process insures that it will perform better and more evenly throughout the life of the candle. For pillars, plan on burning 5-6 hours on the initial lighting. With subsequent use, the candle should remain lit for a minimum of 3 to 4 hours each time. This will insure a clean and efficient burning cycle for the life of the candle.
*To extinguish a candle, dip the wick into the liquid wax, using a non-flammable instrument. This little known technique eliminates smoking
*The wick is designed to produce a small black carbon cap at the top of the wick as it burns. This is normal as it helps radiate heat to the edge of the candle. You should not trim the wick nor touch it while it is cold! After extinguishing the flame, it is best to remove carbon deposits or other foreign materials from the liquid wax when possible.
*Should your candle burn unevenly due to a draft consider this. Carefully push the wick towards the higher side. If this causes dripping, extinguish the flame, let it cool for an hour, then relight the candle. Repeat this practice a few times and the candle will repair itself.
* SweetWaxations Candle burn time:
8 ounces ~ 35 - 45 hours
16 ounces ~ 70 - 100 hours